PDA

View Full Version : tunze pump and controllable power bar



robs.mark
21.09.2009, 14:39
Hello, i have a profilux porfiset with a 4 plug power bar.
I have 2 tunze 6055's that i wish to be independently controllable, so im assuming they plug into S1-4 and s5-8.
My dimmable T5 into L1L2 and my GHL simu into L3L4.
My question is about where to plug the power bar into?
Also if i need to buy something what is the part number?
I dont want to use a splitter as i want each of these products to be independent..

Cheers, Mark.

xiaan
21.09.2009, 15:22
Hello, i have a profilux porfiset with a 4 plug power bar.
I have 2 tunze 6055's that i wish to be independently controllable, so im assuming they plug into S1-4 and s5-8.
My dimmable T5 into L1L2 and my GHL simu into L3L4.
My question is about where to plug the power bar into?
Also if i need to buy something what is the part number?
I dont want to use a splitter as i want each of these products to be independent..

Cheers, Mark.

Do not plug the Tunze 6055 into the S1-S4 or your S5-S8 you may damage your controller!

It looks like you need another LPort to control that

Here is the configuration you need:
L1/L2 - T5 (two channels)
L3/L4 - GHL simu (two channels one controls you moon lights the other controls your Dawn/Dusk lighting)
L5/L6 - 6055s (using the splitter and Tunze cable 1 and Tunze cable 2)

and Plug your power bar into S1-S4 port

Micha578
23.09.2009, 08:50
You must use the Splitter and use the Tunze 1 or Tunze 2 Cable and plug these into any of the L Ports! Dont plug it into a S Port, you will damage the controler as xiaan told it. Please read the manual before connecting any of your equipment