View Full Version : How to start the dosing pump
7thheaven
31.08.2009, 00:02
HI~
I have SA dosing pump and want to know how to start this pump.
The following is what I have done.
0. I connected the hose. Right side hose at pump, I put it in the KH container and the left hose at pump, at the sump.
1. I set the date and time.
2. I choose dosing program
3. I select the pump 1
4. Set the Auto mode
5. Set the 6times a day
6. Set the 10ml each times
7. Save Yes.
The pump display moved main display but After this there is no change.
I also push the red button for remove the air. I waited dosing working during the day but this pump did not work.
The PIN is 0000.
Was there I missed?
7thheaven
31.08.2009, 03:16
Hmm..
I found this in RC Profilux forum
Auto mode
In the mode you simply set how many ML you wish each pump station to dose over a 24 hour period and the controller will auto dose each programme over a 24 hour period never overlapping two dosings at any one time.
That means If I set this 10PM yesterday, The pump will work after 10PM today?
If Yes, I should wait until 10PM today. :)
Antipodes
31.08.2009, 06:33
Hmm..
I found this in RC Profilux forum
That means If I set this 10PM yesterday, The pump will work after 10PM today?
If Yes, I should wait until 10PM today. :)
Hi,
I found this previous thread which may help you.
http://www.aquariumcomputer.com/Forum/showthread.php?t=375
I don't have a standalone pump so can't help much with the rest of it.
But did you say that it did not work when you pushed the red button.
From what I can see this should make the pump operate no matter what(assuming it is plugged in of course.:)
Matthias
31.08.2009, 07:15
How do you know that the pump did not run - did you watch the pump permanently the whole day?
With your settings it will be started 6 times a day, each time for about 6s (assuming you did not change the default calibration of 60ml/s).
If it is pump 1 we are talking about it will be switched on at these times: 0:00, 4:00, 8:00, 12:00, 16:00, 20:00
7thheaven
31.08.2009, 07:30
I set the program Sunday about 22:00.(30th Sun 22:00)
You mean the first Dosing would start 31th Mon 00:00?
Now It is 15:30 (31th August Monday)in Korea. I will check dosing pump at 20:00
and let you know.. Thanks.
Matthias
31.08.2009, 07:35
the dosing will start with the next calculated time
7thheaven
31.08.2009, 14:17
Thanks.
I checked this pump to work well in 20:00
:D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.