Different Screen Brightness

[apexifd]

I just put on the new Mitras, and display looks alot bright than the old one. I tried to change the setting and doesn't seem to do anything

http://i562.photobucket.com/albums/ss67/apexifd/9D2DB968-B697-48E5-879C-698B4F26A881-1416-000001F7BB707A8E_zps95f04aaf.jpg (http://s562.photobucket.com/user/apexifd/media/9D2DB968-B697-48E5-879C-698B4F26A881-1416-000001F7BB707A8E_zps95f04aaf.jpg.html)

new one is on firmware 1.13 and the old one is 1.14. if that makes a difference.

[reeferqq]

Have you check the brightness setting of each lamp in GCC?

[apexifd]

Yes, I did.. Both are the same setting under "extra => display"

[GHL Support]

You have bought one Mitras some time ago and the other one now?
Then it seems that displays of different batches have been built in,
this clarifies why there is a difference in the brightness of the displays.

[apexifd]

here are the serial number.

1305080010 - purchase in June, 2013
1308080050 - purchase in october. 2013

is there a way to fix it??

[GHL Support]

We'll check this and I'll get back to you.

[GHL Support]

Regarding our displays, there can be slight differences in appearance.

You can try and change the contrast by opening the front cover and turning
the trimmer carefully with a screw driver.

[apexifd]

Regarding our displays, there can be slight differences in appearance.

You can try and change the contrast by opening the front cover and turning
the trimmer carefully with a screw driver.

So, where is the trimmer located on the board?

I can probably figure it out, but it's easier just to ask.

[Monty]

Hi,
I would recommend you to download the maintenance guide.

http://forum.aquariumcomputer.com/downloads.php?do=file&id=78&act=down&actionhash=1383981233-7ddbe83cfdd08eda0faeeb5becfac6dd26ebb62a

On page tree is a picture, the middle one between the tree in the center of the page, where you can see the trimmer left to the display.


Sent from my iPad using Tapatalk HD

[apexifd]

I tried that. the older/dimmer unit is already turn to almost max from factory, while the new/brighter one is turn the lowest from factory.

I guess I am stuck with it now.

[Matthias]

if this is an essential problem for you I recommend to contact us or your retailer directly and let us work something out