View Full Version : Gtron powerbar with profilux.
I have a simple question. I have a gtron 4 socket powerbar. It looks like it has an s-port connection. Can I use this powerbar for the moment until my two NEW 6 PAB powerbars will arive over one month. I have already connected one 6 D pab power bar to my profilux 3ex
Matthias
27.08.2013, 08:53
yes, they are compatible
yes, they are compatible
Thanks Matthias, so as I understand it correct the gtron powerbar will be connected to an open S-port. Is their an special procedure to set it up in the profilux.
GHL Support
27.08.2013, 10:13
No, the settings should be the same as for our STDL-4.
No, the settings should be the same as for our STDL-4.
I connected the powerbar to an S-port and power up the power bar. But I don't see any LED burning up. I hope I do something wrong. Or see something over the head
GHL Support
28.08.2013, 13:45
On the Powerbar there will only light up an LED if the belonging socket is switched on.
Have you already assigned a function to the single sockets (under System/ socket functions)?
For testing you can also switch the sockets manually on, then the four LEDs should light up.
On the Powerbar there will only light up an LED if the belonging socket is switched on.
Have you already assigned a function to the single sockets (under System/ socket functions)?
For testing you can also switch the sockets manually on, then the four LEDs should light up.
Thank you. It is working now.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.