View Full Version : ProfiLux Computer Webinterface
ProfiLux Computer Webinterface was completely revised.
Please post your suggestions in this thread.
Yes it looks very nice.
i see sensors not in use have been removed which is great.
can all the unused switch/lights sockets be removed?
It is already possible, you can show/hide each sensor, switch/light socket in your overview settings. Press the button "settings" on top right corner of your web interface and set up your overview.
This setting is only for the overview page.
Thanks very much did not see that.
Well done on the webserver changers.
Just thought of another idea, can the amps used for each socket also show in the overview so we can see if they are functioning.
Also a graph showing total amps used for all sockets.
New beta version comes out today.
Socket and illumination response is significantly impoved.
Actual current is displayed for each socket.
Sensordata is being now continuously updated and show las 24 hours, week, month, 6 months and all sensordata.
You can show/hide all sensors, sockets and illumination in your settings at once.
tyuksel76
24.07.2013, 14:18
The new web interface is neat. I only have problem with the history of conductivity and redox sensors on Expansion box. The current value of the sensors displays but the little graph that shows history doesn't appear.. Keep up the good work.
Have you activated gathering "measurment data" for theese two sensors?
You can activate it with Profilux control in Probe/Sensor controls -> Measurment data
tyuksel76
24.07.2013, 14:43
Yep. I can see the graphs from PLC. I also see the graph when i look at sensor detail in web interface. It just doesnt show up on overview page.
Sent from my GT-I9300 using Tapatalk 2
Matthias
24.07.2013, 15:19
new 5.17 now in download section
tyuksel76
24.07.2013, 18:02
This solved my issue. I forgot to back up sensor data but the graphs appear fine now. Good job.
Sent from my GT-I9300 using Tapatalk 2
Matthias
24.07.2013, 18:54
perfect!
thanks for your feedback
Just updated latest webserver, works much faster which is great.
note that the some of the off/on buttons do not line up.
http://forum.aquariumcomputer.com/attachment.php?attachmentid=4759&d=1374685956
can the on button be more green colour as they are hard to see, also can the off button be red?
tyuksel76
26.07.2013, 12:43
perfect!
thanks for your feedback
No, I thank you for providing all this changes in the recent weeks. I am happy i invested in Profilux and that i can have peace of mind when i am away for business travels.
http://i1226.photobucket.com/albums/ee402/tyuksel/Capture_zps61e35f44.png
Matthias
26.07.2013, 13:11
Just updated latest webserver, works much faster which is great.
note that the some of the off/on buttons do not line up.
http://forum.aquariumcomputer.com/attachment.php?attachmentid=4759&d=1374685956
can the on button be more green colour as they are hard to see, also can the off button be red?
Denis will check this and find a solution
what browser are you using?
Antipodes
30.07.2013, 23:41
Just updated latest webserver, works much faster which is great.
note that the some of the off/on buttons do not line up.
http://forum.aquariumcomputer.com/attachment.php?attachmentid=4759&d=1374685956
can the on button be more green colour as they are hard to see, also can the off button be red?
Had the same problem as you Reef.
Amended my names in the profilux to a max of 14 characters including space. Shows up in line as below.
4793
Tried in latest versions of Opera, Chrome, IE and Firefox. (Can't seem to get a late version of Safari for Windows?)
Antipodes
30.07.2013, 23:46
I believe this is for Dennis?
In all the graphs, my times show as UTC not the local time? (NZ +12)\
Note these times shown are actually 09:00 to 10:30 am
Example
4794
Thanks
@Antipodes
The web interface gets time from ProfiLux Computer.
Which Beta is installed?
Your graphs show 4 ticks on time axis, which should show max 3 of them.
Does anybody have also 4 ticks on time axis?
How do you get the 24/week/month bar?
24/ week/ month bar is available for Chrome, Firefox, IE.
Antipodes
31.07.2013, 11:43
@Antipodes
The web interface gets time from ProfiLux Computer.
Which Beta is installed?
Firmware dated the 23/7/2013 (Downloded and installed on the 29/7/2013.)
But the probe page below is 12 hours out to main system time as shown by the latest time line on the graph which shows 8:30 when it should be showing 20:30.
I also note that the date is set as D/M/Y but is showing in the graph as M/D/Y
On the Profilux control software main page it does show the time as D/M/Y?
4804
Your graphs show 4 ticks on time axis, which should show max 3 of them.
Does anybody have also 4 ticks on time axis?
This only seemed to be after the update when it had no measurement parameters. Once it had a few measurements to pull from it seem to go to a 3 line axis.
4803
Thanks for looking at this! And thanks for the work you have put into this already. It is looking pretty good for me and as I don't use Android or iAnything, means it works on all my windows devices! Looks great on my windows Tablets!
Antipodes
31.07.2013, 11:57
Dennis, sorry tried to edit the post above, but it failed.
Firware date 23/7/2013 and downloaded installed on the 29.
The date is reading D/M/Y on the Profilux control mainscreen, so not sure why it is reading reversed in the web page.
4804
It's really strange, because data is parsed from measurment data from sensor. I'll take a closer look to this.
I have the same problem ... reported here (http://forum.aquariumcomputer.com/showthread.php?7239-Profilux-3-Webinterface)
Though mine thinks it is a crystal ball predicting the future by a few weeks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.