mzbwlk
24.08.2009, 00:47
Hi,
I’m setting up a LED dimmable lighting system with 168 Cree White and Blue (2:1 ratio) LED’s.
I will be using Mean Well ELN-60-48P dimmable power supplies (8 for the WHITE and 4 for the BLUE).
I will also have 4 controllable pumps. These will be either Hydor Koralia or Tunze.
This is what I want to Profilux Plus II eX to do:
Control all of the WHITE LED’s with the (8) ELN-60-48P together on L1 channel.
Control all of the BLUE LED’s with the (4) ELN-60-48P together on L2 channel.
Now do I connect all of the WHITE LED’s PWM’s in parallel (neg to neg; pos to pos).
All of the BLUE LED’s PWM’s in parallel (neg to neg; pos to pos).
Do I need to get an EVG-AP-2F expansion card to this? Or a PLM-DALI card? And do I need any YL2-1 splitters?
As for the pumps if I go with the Tunze I will need the Tunze cable 1 and cable 2 (2 each) and (2) YL2-1 splitters. These would go in the L3/L4 & L5/L6.
As for the Hydor Koralia pumps, I would need (2) GHL Profilux Hydor Koralia Pump Controllers to control 4 pumps. These would be connected to L3/L4 & L5/L6.
I have not ordered the Profilux Plus II eX yet but, it is in the “Shopping Cart”!:D
I just want to make sure I order the right parts the first time around.
Thanks for all of the help.
Dave.
I’m setting up a LED dimmable lighting system with 168 Cree White and Blue (2:1 ratio) LED’s.
I will be using Mean Well ELN-60-48P dimmable power supplies (8 for the WHITE and 4 for the BLUE).
I will also have 4 controllable pumps. These will be either Hydor Koralia or Tunze.
This is what I want to Profilux Plus II eX to do:
Control all of the WHITE LED’s with the (8) ELN-60-48P together on L1 channel.
Control all of the BLUE LED’s with the (4) ELN-60-48P together on L2 channel.
Now do I connect all of the WHITE LED’s PWM’s in parallel (neg to neg; pos to pos).
All of the BLUE LED’s PWM’s in parallel (neg to neg; pos to pos).
Do I need to get an EVG-AP-2F expansion card to this? Or a PLM-DALI card? And do I need any YL2-1 splitters?
As for the pumps if I go with the Tunze I will need the Tunze cable 1 and cable 2 (2 each) and (2) YL2-1 splitters. These would go in the L3/L4 & L5/L6.
As for the Hydor Koralia pumps, I would need (2) GHL Profilux Hydor Koralia Pump Controllers to control 4 pumps. These would be connected to L3/L4 & L5/L6.
I have not ordered the Profilux Plus II eX yet but, it is in the “Shopping Cart”!:D
I just want to make sure I order the right parts the first time around.
Thanks for all of the help.
Dave.