View Full Version : Problem with key control in Profilux Plus II
Hi everyone,
I have a problems with Profilux Plus II.
I can't use profilux using keys on device. Despite the pressing of buttons nothing happens.
I hear only clickin signal ( beep ) when I press buttons.
Other functions of this Profilux works well. I can connect to device by PC app, set everything.
Some times I see blinking Alarm LED only.
on PC app in Remote Control LCD display the same what is on device. There is only http address to GHL.
In remote tab buttons not working too...
When I'm restarting device I see information about detected cards in slots, Intro with eating fish on first line and... that all :-)
When I made firmware update LCD is changed and I see firmware update ... press yes....
So, It looks like LCD and key are OK.
I've made upgrade to firmware 5.15 now.
As you can see there was replaced LCD screen which was damaged but the problem was before.
Now I can't calibrate ph probe for example :-(
4371
4372
Do you have any idea how to repair it?
GHL Support
15.05.2013, 06:47
Which version was the firmware before the update?
Are you using the matching PLC version?
Could you post the PLC main window, when the connection to the ProfiLux established?
The display was replaced by us, but the problem with the keys was before??? Very strange.
ad.1 Before Update there was 5.0.5 but the problem was the same.
ad.2 Yes
ad.3 I'll put the screen for a moment.
ad.4 LCD I've replaced alone. The problem was before.
4380
GHL Support
15.05.2013, 13:56
Sorry, I mean the main window of PLC (general selected at the menu tree).
I wonder, how do you could replace the display, because it's no standard one...
Did the keys ever worked before?
Yes, it worked well in the past
4381
Sent from my iPhone 5 using Tapatalk
GHL Support
16.05.2013, 07:18
Hmm, very strange - there must be a event before the keys not working anymore.
Maybe the ProfiLux PCB with the keys is not assembled correctly.
I think the best solution is to send the ProfiLux to GHL for a examination.
Please contact your retailer for further details.
Hmm... maybe yes but, cost of shipping to GHL and back will be 1/3 price of its value :-) ( without of cost of repair :-) )
OK, thanks for info
I've been trying to update firmware with flash software by RS232 but all the time I've got timeout warning.
When I use PLC soft to update by USB, all works well...
Is any option to calibrate ph probe from PLC soft , not from Profilux keyboard ?
Is any option to calibrate ph probe from PLC soft , not from Profilux keyboard ?
You can use the remote control of PLC
Remote control shows the same what LCD :-) This is the problem.
Mathias, is it possible to add calibration option from PLC?
This is the problem.
It shows what is needed for calibration, so please describe a little more where you see a problem.
Gunther, please read posts in this topic.
On LCD and on remote control screen I see in second line www.ghl-kl.de
for that, I can't use remote control and LCD for ph problem calibration.
Gunther, please read posts in this topic.
This is an individual fault of your PL, not a general problem. And in fact, no one knows if PLC calibration would work on your device. IMHO it would be to repair your PL instead.
Matthias
31.05.2013, 10:13
this displayed message shows that there is something wrong with your serial number or the internal (secret) validation key (which is a protection against theft of intellectual property)
I guess the S/N or validation key went corrupt acidentally -> we have to recover them
please send an email to me, I can assist you to fix it
Hi Matthias, I've sent you S/N by mail but for till now I didn't get any response.... :-(
Is it possibility to get help with this problem?
Matthias
26.08.2013, 17:09
I checked my emails but couldn't find something
do you mind to send it again?
Now I'm sending again,
thanks Matthias :-)
kam.alex
05.09.2013, 17:55
Hello, excuse me, did you decide your problem, because i have such trouble with my PL2. I disconnected the bus between monitor and sensor plate. The keys are not reacting, only beep, and www.ghl-kl.de on display. Thank you.
I'm still waiting for Matthias response :-(
GHL Support
06.09.2013, 08:08
I'm still waiting for Matthias response :-(
He will return from the Macna-trip from the US in about a week, he will reply to you after that.
Thanks for your patience.
kam.alex
06.09.2013, 09:40
Thank you!!! we yare waiting!!!
GHL Support
06.09.2013, 12:02
Hello, excuse me, did you decide your problem, because i have such trouble with my PL2. I disconnected the bus between monitor and sensor plate. The keys are not reacting, only beep, and www.ghl-kl.de on display. Thank you.
Hello,
we recommend to send the device in for checking to find out the exact error cause.
Please contact your retailer regarding the further return process. Thanks.
kam.alex
06.09.2013, 21:35
In my case it's impossible, because i'm live in Moscow.
GHL Support
09.09.2013, 12:08
@kam.alex: Can you please give us the serial no. of your ProfiLux, please?
kam.alex
09.09.2013, 23:21
of course!!! with pleasure! S/N: 0903092065
GHL Support
11.09.2013, 14:50
Hmm, there must happened something before the keys are not working anymore.
The key don't stop working, if nothing happened before.
Did you make an firmware update, changed the hardware setup or changed some settings?
kam.alex
11.09.2013, 15:44
First of all, i turn off my pl2p for a long time. After powerup, there was a problem. The keys arу beeping, after that i make a firmware update, but no result.
GHL Support
12.09.2013, 06:47
Hmm, very strange... but you have a PM
Carolin, I'm still waiting for help about my profilux 2.
I'm waiting for Matthias response, but I haven't got any email/message for till now :-(
Can you help me with this?
Can you help me?
Sent from my iPhone 5 using Tapatalk
GHL Support
24.09.2013, 08:09
Sent a PM with the security key...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.