View Full Version : new 5.16 for ProfiLux and profiLuxControl 5.1.6.0
Matthias
12.04.2013, 18:20
in our download center
I'll update mine and have a go with it.
Irishreefer
12.04.2013, 20:47
Updating mine and BOOM the profilux went dead ??????????
Help!
The profilux seems dead nothing happening blank screen nothing.......
Paul
doggydoc10
12.04.2013, 20:49
Did you use the RS-232 cable for the update?
Doggydoc
Irishreefer
12.04.2013, 20:51
Hi Doggydoc
Thanks for the quick reply
Yes RS-232 used Id say it was 3/4 way through when it seem to freez and then went blank
Paul
Mine went through ok with no issues, I do suffer anxiety through the process though.
Irishreefer
12.04.2013, 21:08
Any ideas how to get it bak working???
Thanks in advance
There's a thread here (http://forum.aquariumcomputer.com/showthread.php?1274-ProfiLux-3-What-to-do-in-the-case-a-firmware-update-failed) which gives instructions.
I have trouble with PLC 5.1.6 down loaded sveral times and installed ( even did computer shut down and restart) but program will not run keeps coming up error entry point not found..the procedure entry point InitializecriticalsectionEx could not be located in the dynamic link library KERNEL 32.dll. Yes the three words are there with no spaces.
Irishreefer
13.04.2013, 07:55
Ok I back up and running but 515 only for now, thanks for the help Arron and DoggyDoc.
Matthias
13.04.2013, 10:16
I have trouble with PLC 5.1.6 down loaded sveral times and installed ( even did computer shut down and restart) but program will not run keeps coming up error entry point not found..the procedure entry point InitializecriticalsectionEx could not be located in the dynamic link library KERNEL 32.dll. Yes the three words are there with no spaces.
ok, we found out that the new version does not work with XP - see my other thread to this topic
Has the 5.16 Firmware been removed from the Download section? Ive installed 5.1.6.0 without issue (Windows 7).
As an FYI, Official Support from Microsoft for XP does not end until April 8, 2014.
doggydoc10
13.04.2013, 15:11
Interesting Jason. I also have windows 7 but wasn't able to FULLY download.
Doggydoc
Win 7 Pro, 32 Bit, and up to date on all MS patches.
doggydoc10
13.04.2013, 15:32
Win 7 Pro, 32 Bit, and up to date on all MS patches.
Same here. I wonder what's going on with mine. In am sure I have some hardware issue in my P3
Doggydoc
Matthias
13.04.2013, 17:03
we are again mixing topics here!
ProfiLuxControl makes trouble on XP PCs and DoggyDoc had problems with the firmware 5.16
no, this is not a hardware issue
To my earlier post, i cant find 5.16 in the download section?
Sent from my iPhone using Tapatalk
doggydoc10
13.04.2013, 19:52
I believe GHL removed it from download section due to issues... But that is MY UNOFFICIAL ANSWER
Doggydoc
Matthias
15.04.2013, 07:23
yes, that's right - until we located the problem doggydoc reported
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.