DIY Leds Passive or Active

[freshwest]

Hi.
I have built a 288 cree led system for my 1600L tank. I would like to control them with my 3.1A ex controller. At the moment I can dim them with pentameters.
The drivers I am using are Meanwell HLGs (B) http://www.meanwell.com/search/hlg-185h/default.htm
Can you till me witch of the led control 4 s would be suitable for these drivers.
Thanks

[Gunther]

You can connet the meanwells directly to the L-Ports using LF-AP or with switch for power supply with LF-ABOX or the EVG-AP-1F-HIC/EVG-AP-2F-HIC.

To have also flashes for thunderstor you should use a LEDControl4passive

[freshwest]

Hi
Thank you for your response.
Can you link me to some technical data to the what you have mentioned.
Thanks

[Gunther]

LEDControl4Passive (http://support.aquariumcomputer.com/german/download.php?did=181)
LEDControl4Active (http://support.aquariumcomputer.com/german/download.php?did=180)
EVG-AP2 (http://support.aquariumcomputer.com/german/download.php?did=80)

[Matthias]

LEDControl4 V2 replaced the previous versions, see manual here:

http://forum.aquariumcomputer.com/downloads.php?do=cat&id=9