View Full Version : USB to Serial Adapter
Hi Matthias I have a quick question. My computer that I used to do firmware updates died so all I have now is a computer with USB connections no serial, so my question is can I use a usb to serial adapter to do the firmware updates? Or will this cause a problem?
Rich
Matthias
30.07.2009, 08:07
in most cases it works but some converters are not reliable
Micha578
06.08.2009, 08:28
As Matthias say it works you have the best results in using USB-to-serial cable with a profilic chipset. Many other convertercables may cause problems.
I am using a converter with the prolific chipset. Normal operations are working well but every time I have tried to update firmware it failed halfway through and I had to use a computer with serial port and do the manual firmware update
Micha578
03.09.2009, 19:09
Did you confirm the update on the Profilux Display while you start the progress?
I have, The update started but failed with a communication erro few seconds later.
GHL Support
04.09.2009, 08:11
I have, The update started but failed with a communication erro few seconds later.
Do you use the original serial PC-cable from GHL between ProfiLux and the USB-->serial adapter?
I am using the original GHL cable
Hi,
sorry, I don't speak english very well, but I had have the same problem.
My firmeware update ( and the connection) goes only with the USB-->serial adapter. When I take the original serial GHL cable between, then works nothing else. :confused:
I'm anxious, what the answer is.
Greets
Petra
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.