PDA

View Full Version : Feed Pause



CaptCrash
24.09.2012, 09:09
Previously I was using non-dimmable lamps and simply powered on lights during a feed pause with programmable logic.
I am unable to find a method to do this with 1-10v controlled lights.

Is it possible to set a dimmable lamp on during a feed pause?
eg. My lamps respond to clouds, thunderstorms and rainy days. This can mean that at times they are not very bright, I would like to be able to control their brightness at feeding times.

Matthias
24.09.2012, 18:38
it is even easier

you can setup the voltage for each 1-10V-interface during maintenance

check the maintenance settings

CaptCrash
24.09.2012, 19:29
it is even easier

you can setup the voltage for each 1-10V-interface during maintenance

check the maintenance settings

Matthias, thanks for the rapid response, this will do what I want, it will use my last free maintenance slot.

My plan was to move more of the lighting for my systems to 1-10v dimmable over the next few months.
These systems are feed at different times (reef tank, 3 x breeding racks and growout/fry), is there a way to do this without lighting all of the tanks at once with a single maintenance?

If not, then is it possible to add this capability to the feed pause (1-10v control) or add more maintenance choices?

Matthias
24.09.2012, 19:52
feedpause can only switch sockets and lower pump speed

CaptCrash
25.09.2012, 02:54
I understand that this is the only option today.
Is it something that can be added to feed pause in the future or can more maintenance options be added?

Do you want me to post this in the wish list section and leave this thread as the original problem is now fixed.

ss162400
25.09.2012, 11:47
feedpause can only switch sockets and lower pump speed
How can feedpause do lower pump speed? Thanks,

CaptCrash
25.09.2012, 13:47
As part of the pump control, there is a setting for the speed during a feed pause.
This is for controllable pumps like Tunze (and I assume Ecotech) etc

ss162400
25.09.2012, 13:58
As part of the pump control, there is a setting for the speed during a feed pause.
This is for controllable pumps like Tunze (and I assume Ecotech) etc
Thanks CaptCrash, Would you please get me a details for the Tunze pump's setting on PLC.

CaptCrash
25.09.2012, 14:46
For the controllable Tunze pumps that have a 1-10V input, you can set them up under Extras -> Current Pumps
I found it easier to do this in Profilux Control.

Have a look in the manual
http://support.aquariumcomputer.com/english/download.php?did=462

chapters 1.3.4, 7.4, 7.5 and 8.4


If you have a look through the pump control forum http://forum.aquariumcomputer.com/forumdisplay.php?10-Pump-control&order=desc there are a heap of examples

ss162400
25.09.2012, 16:50
For the controllable Tunze pumps that have a 1-10V input, you can set them up under Extras -> Current Pumps
I found it easier to do this in Profilux Control.

Have a look in the manual
http://support.aquariumcomputer.com/english/download.php?did=462

chapters 1.3.4, 7.4, 7.5 and 8.4


If you have a look through the pump control forum http://forum.aquariumcomputer.com/forumdisplay.php?10-Pump-control&order=desc there are a heap of examples

I mean that how to set to control pump's speed automatically,when feedpause happens. Thanks.

GHL Support
28.09.2012, 08:52
Is this the setting you are looking for?

3056

ss162400
28.09.2012, 09:36
Is this the setting you are looking for?

3056

Thanks, Understanding.

CaptCrash
01.10.2012, 05:12
I mean that how to set to control pump's speed automatically,when feedpause happens. Thanks.

It is set under Extras->Current Pumps, select the pump at the bottom and then click on edit. You can choose minimum or off.