View Full Version : Dark Screen Not Dark KNIGHT !
I was checking my tank's parameters yesterday and I noticed my ALK, Mg, and Ca levels were all lower than I usually keep them. As I was checking my dosing unit I noticed the screen on my PIII was dark. All the buttons were still illuminated but the screen is dark. I disconnected the power supply, which was very hot, and then plugged the unit in again and it started as normal. Within a minute or so the screen went dark again. Any suggestions ... Thank You in advance for your help, Neil.
Looks like the power supply is defective.
I thought so too. But because the buttons are still illuminated, I thought it may be internal ! Wonder if I could use a generic power supply to power the unit and see if problem persists ? Any thoughts ...
aqua_digital
21.07.2012, 14:35
If the screen is turning on and off it sounds like the front board or the DCDC converter on the main board, please contact your local distributor for repair.
Thanks Michele , who would be my closest distributor ... I am in NY. TY
aqua_digital
21.07.2012, 18:58
Michele? Great now I am a girl! Nobody informed me of the sudden change ;)
Well that would be me then! Trouble is I dont have one, email me at sales@aqua-digital.com and I will converse with you on Monday about options.
aqua_digital
21.07.2012, 19:47
no worries, drop me an email we will discuss what the issue could be.
Matthias
22.07.2012, 12:21
I think the PSU is dead
even if the background LEDs are on
aqua_digital
22.07.2012, 14:16
I thought so too. But because the buttons are still illuminated, I thought it may be internal ! Wonder if I could use a generic power supply to power the unit and see if problem persists ? Any thoughts ...
If you can get a generic power suppy this will speed up Matthias diagnosis or use the power supply from a doser if you have one. Let me know by email, we have PSU's here.
Well the problem is not with the power supply! I used the one I have from a brand new doser I have and it does the same thing! Matthias ... ? HELP !
aqua_digital
24.07.2012, 17:51
Hi
I asked if you could email us so we could help you. Not received as yet.
Matthias
24.07.2012, 20:59
you are from UK when I remember correctly?
please ask your retailer fpr support, this should be the quickest solution, I wish I could but I can't help from here
aqua_digital
24.07.2012, 21:47
Thanks Michele , who would be my closest distributor ... I am in NY. TY
Nope New York USA I think?
Michael, the DC-DC converter you asked about ... is it the other side of the power plug or is it the black box on that pc board that is mounted closest to the screen side? If it is this one, yes it gets hot to the touch.
aqua_digital
01.08.2012, 14:48
I think this will be impossible to diagnose over email or forum, I dont want to send you parts only to find its not the right ones. The fastest option would be for you to send to us for repair.
I do not have a front screen on hand so would need to get one sent from GHL for us to fit for you if it is the front board PCB.
OK Michael, what address do I send it to ? and any idea what this repair will run me ? Neil
aqua_digital
01.08.2012, 15:32
drop me an email for address and important shipping instructions.
No idea on cost until we know what the issue is, however I do not charge anymore than the parts costs us keeping all GHL repairs costs to a minimum for clients, plus shipping of course ;) labour cost is free also.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.