JasonMcK
26.02.2009, 19:56
This maybe a silly question but I have to ask.
I found the set up of the dosing pumps very straight forward. I was amazed at how simple it was.
But the one thing I wanted to make sure of is the calibration steps
This is how I calibrated my pumps.
I first got a graduated cylinder and ran the pump manually for 1 minute. Let it rest for 1+ minutes and ran the pump again. And then 1 final time
from there I took how much liquid was in my cylinder and divided by 3. in my case I got 43ml
I then changed the default 60ml/min to 43ml/min
and repeated the steps for my remaining pumps
J
I found the set up of the dosing pumps very straight forward. I was amazed at how simple it was.
But the one thing I wanted to make sure of is the calibration steps
This is how I calibrated my pumps.
I first got a graduated cylinder and ran the pump manually for 1 minute. Let it rest for 1+ minutes and ran the pump again. And then 1 final time
from there I took how much liquid was in my cylinder and divided by 3. in my case I got 43ml
I then changed the default 60ml/min to 43ml/min
and repeated the steps for my remaining pumps
J