michelg
24.01.2012, 23:11
Hi,
I have purched the following items from profilux and was wondering what the best is for me to be controlled.
Profilux 3EX
PaB socket (6)
temp probe This i want to control my heater and chiller. But I got the info that it is not good for the PAB sockets to use it for the chiller. Is this true?
redox probe This I want to use it for my Ozon Aquamedic 200gr for a with a value arround 420Mv
condutivety probe
Ph probe
Propeller control To control my fans in the hood off my lightning.
Dosing unit (4) To dose Grotech A, B, C and M trace elements conect in PAB socket
Vortech controller 2x Vortech MP-10. Do I need to plug my vortech controllers in the PAB Socket?
2 Level sensors 1 for Sump and 1 for min. water level in top off tank so pump dont run dry (Eheim compact 1000).
PLM-4L 4 extra 1-10V card
Profilux Simu-L Light simulation.
EVG-AP-2F HIC control for 3 ATI dimmable balast 2x39W 1-10V 0-100%
Now do I have also 2 Eheim Compact 2000 and 3000 return water and in my sump, 9W UV-C Filter, Skimmer with 2 pumps.
So knowing I have only 6 socket what would be your advise what and where to connect and why so I have a correct set-up
Let me know your advise.
I have purched the following items from profilux and was wondering what the best is for me to be controlled.
Profilux 3EX
PaB socket (6)
temp probe This i want to control my heater and chiller. But I got the info that it is not good for the PAB sockets to use it for the chiller. Is this true?
redox probe This I want to use it for my Ozon Aquamedic 200gr for a with a value arround 420Mv
condutivety probe
Ph probe
Propeller control To control my fans in the hood off my lightning.
Dosing unit (4) To dose Grotech A, B, C and M trace elements conect in PAB socket
Vortech controller 2x Vortech MP-10. Do I need to plug my vortech controllers in the PAB Socket?
2 Level sensors 1 for Sump and 1 for min. water level in top off tank so pump dont run dry (Eheim compact 1000).
PLM-4L 4 extra 1-10V card
Profilux Simu-L Light simulation.
EVG-AP-2F HIC control for 3 ATI dimmable balast 2x39W 1-10V 0-100%
Now do I have also 2 Eheim Compact 2000 and 3000 return water and in my sump, 9W UV-C Filter, Skimmer with 2 pumps.
So knowing I have only 6 socket what would be your advise what and where to connect and why so I have a correct set-up
Let me know your advise.