View Full Version : activate socket on level alarm
robertvo
07.01.2012, 13:56
How do I activate one switchable socket when a level alarm occurs??
GHL Support
10.01.2012, 10:35
Which function do you like to achieve? Perhaps one of our existing level operation modes (or inverted) can be used.
robertvo
10.01.2012, 10:48
Hello Carolin,
My aquarium gets a constant water supply. All the excess of water enters a drain.
In case the drain gets plugged for some reason, the level of the water in the aquarium will rise above the drain pipe, activating a level sensor #1.
Whenever this alarm occurs, the Socket S4 should be deactivated, since I bought in a NC solenoid valve, that I mounted on the water supply line.
Thanks
Blahenazo
10.01.2012, 20:17
this is just normal level control and can be achieved easily
robertvo
10.01.2012, 22:26
??
GHL Support
11.01.2012, 10:58
??
What about the mode "leakage detection"? Please have a look at the description in the manual.
robertvo
11.01.2012, 12:53
that works! thanks a zillion!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.