PDA

View Full Version : My new project.....



LOLLO77
20.10.2011, 18:53
19321933

Sorry for my English ...

I am going to set up an aquarium of 500 liters, 200 liters of refugium, sump 100 liters, 10 liters tank mangroves

technical equipment

riffkeramik
pump lifts NJ4500
LGM skimmer 850sp
N 2 Tunze 6095
N 1 Tunze Wavebox
N 1 VorTech mp10 for refugium
CO2 cylinder 14 liter
reactor built by me
80 kg live sand (DSB)
N 2 oscimotion constructed by me
# 1 250W HQI
N 2 CANNON 100W LED
N 2 ROYAL BLUE LED BAR
N 1 LED MOON
N 4 dosing pumps
N 1 WEB CAM
GHL Profilux EX 3
MONITOUR TOUCHSCREAM


YOU HAVE TO HELP ME TO THE MATERIAL Segl GHL

LOLLO77
22.10.2011, 12:19
help me to components
1939

richard.mayo
24.10.2011, 05:47
I don't think the dosing pumps are PAB, you need to use a S port

LOLLO77
24.10.2011, 05:53
ok thanks

but with the power vents can do it, and finally connect the touch scream

LOLLO77
25.10.2011, 13:23
dimmer Power Supply 0 - 10V
What should I use?

Wirus
25.10.2011, 13:55
dimmer Power Supply 0 - 10V
What should I use?

Any that fits the lamp requirements. There are no details given, so it´s not possible to select a driver. I suggest to ask the lamp supplier for his recommendation.

Hint: Due 1-10V doesn´t switch off completely, you need a switched socket or a EVG-AP-2F-HIC to switch off the lamps completely

LOLLO77
25.10.2011, 19:01
hello
thanks for the answer
I have to connect a Mean Well ELN-60-48D, or Mean Well ELN-60-48P
what to use?

Wirus
25.10.2011, 19:22
what to use?

The D type is for dimming 1-10V, so it´s ok.
And again: No idea about the driver itself due you gave no infos about lamp requirements.

LOLLO77
31.10.2011, 19:51
Remote Dimmable 100 watt LED Driver

Features :
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
High efficiency up to 93%
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potential meter
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or PWM signal or resistor)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.10)