PDA

View Full Version : solar Stinger LED



marco
17.09.2011, 06:52
hello again

through my employer, I have a econlux solar Stinger LED 1000 mm for testing.
Here's a 0-10 output for the dimming of the strip as you can see on the picture.
Are these light tubes dimmable on the profilux 3 and do i need a LED control unit, and which one do i need?


thanks for the reply.

Greetings marco


18841885

Blahenazo
17.09.2011, 11:46
normally this should be a direct fit to the L-port of the profilux . (giving the 0-10v steering doesn't demand to much current from the L port )
but that can be easily checked by a current meter.

marco
17.09.2011, 14:39
thanks for the reply.

so if i understand it, i can connect the led strips the same way as a T5 or T8 light tubes?