PDA

View Full Version : Problems with the different Graph's on the Touch



mdanielse
16.08.2011, 14:44
I came acrose some strange thing when i look at the graph's of the sensordata.

FIRST: When i look at the 7 day graph, it is completly full.... so i have a minimum of seven day's sensordata.
But when i look at the 30 day graph, a few day's are missing..??? (See photo's)

SECOND: I can only display the conductivity sensordata in ms, but i have set it at PSU and one virtual sensor at Kg/L, i know that the shape of them is all the same, but when i set it at PSU or Kg/L then i want to see PSU or Kg/L everywhere and i don't want to see ms anywhere. (See photo's_

THIRD: There are units missing from the Y-axis, this happens in different graph's (See Photo's)

FORTH: And the most irritating one, The range on the Y-axis are almost totally useless. Especially the conductivity graph, you can only see a straight line, and not any of the fluctuations. Other have also put this problem to your attention.


Hope that you can fix these problems as soon as possible. The Touch is a great device but it still needs some fine tunning by you.

With Kind Regard,
Jack
1777 1778
1779 1780

mdanielse
16.08.2011, 14:47
And a few more photo's

1782 1784
1781 1783