PDA

View Full Version : PLM-4L added to ProfiLux3-Ex: only one additional L-port



themoose
11.06.2011, 15:35
Hi,

I have added a PLM-4L card to my ProfiLux3-Ex and now have the following ports available:
L1-2 \
L3-4 ProfiLux3-Ex
L5-6 /
L7-8 \ PLM-4L
??? /

I would have expected to have 2 additional ports like L7-8 and L9-10 i.o. only L7-8; one of the two L-outlets on the PLM-4L card does not do anything?

Any suggestions what could be wrong?

Ruud

GHL Store
12.06.2011, 09:50
Are you sure you have the PLM-4L card and not the PLM-2L4S?
Then you must have L7L8 and L9L10 available.
Have you tried the card on another slot already?

themoose
14.06.2011, 18:44
Are you sure you have the PLM-4L card and not the PLM-2L4S?
Then you must have L7L8 and L9L10 available.
Have you tried the card on another slot already?

Thank you for your response.

I am sure I have the PLM-4L card (shown in PLC | System -> '4L' shown).
I have just moved the card to the other slot (and back) and things seem to be working fine now.
No idea what was wrong previously.

Ruud