PDA

View Full Version : DIY LED Build with Meanwell drivers and EVG-AP-2F



JasonK
30.05.2011, 05:20
I'm just about to embark on an LED build. I've got the Meanwell LED drives with 1-10V control. As these drivers auto switch themselves off at anything less than 1v control I think all I need is connector cables into the L ports? Can you confirm and if possible let me know the updated link for the wiring diagram. I've found a link which was posted previously which doesnt work. http://www.aquariumcomputer.com/Download/Manual_EVG-AP2_V400.pdf

Thanks

Matthias
31.05.2011, 11:03
http://support.aquariumcomputer.com/german/download.php?did=80

JasonK
31.05.2011, 18:26
Thanks Matthias. Will the EVG-AP-2F work in the US (110v power from wall socket)?

GHL Store
01.06.2011, 13:13
Due to the 110V, we recommend to use the EVG-AP-2F-HIC version.

JasonK
02.06.2011, 14:05
Thanks