LED Light stick

[Omega2004]

I am having allot of difficulty setting up my light stick and need some help please.

Can somebody please give me a step by step to set this thing up as a sunrise and moonlight?

I am not running any T5's or other dimable lights from the unit. I plugged the Stick into L1/L2 and set the moonlight on for channel 1 and 2.

If I use manual setting or check settings with time frame, it becomes orange and red for sunrise but I just cannot get the moonlight setting correct.

Any help will be appreciated.
Thanks again.

[Matthias]

you also have to program the "illumination runs" accordingly to your wishes

means: illumination 1 (which is the moon in your case I assume) needs other times than the default times are

[Omega2004]

Hi Matthias,

Thanks for the reply, I have done what you have advised me too do and I hope I did it correctly.

What I did was:

L1: 18:00 = 100% 5Min
L1: 08:00 = 0% 5Min
L2: 09:00 = 100% 5Min
L2: 17:00 = 0% %min

On the Graph in control it displays that the channel is on for set times. Then I go to "Moon" and Set moon for L1 and then the LED switches off.

[Omega2004]

O and Moon is set from 19:00 to 07:00

[kustochhav]

Hi Omega2004,
Set Moon simulation from 17:50 to 08:10

[Matthias]

the times for the moon simulation should cover the times for your moon lamp

check the moonphase percentage - this value is multiplied with the actual brightness