View Full Version : Cable view 2
Hello,
I noticed that my display wasn't working after inserting en releasing the connector 100 times last week because of problems with my profilux 3, after shaking a littlebit with the cable the display was working again so i opend the connector and find out that 2 of the 4 cables where lose. does anyone know on what pin what colour cable most be? many thx
Carolin/Matthias can you help me out with this one? is there a electrical schematic for the serial connector?
thx
Hi scrub29,
If you mean the cable that connects Profilux View II to Profilux computer, here is a photo of my cable in the end of Profilux II
http://forum.aquariumcomputer.com/attachment.php?attachmentid=1526&d=1302939609
If you mean the cable that connects Profilux View II to Profilux computer, in the end of Profilux goes this way:
Pin2:Brown
Pin3:green
Pin5:Red
All other pins are without any cables.
http://forum.aquariumcomputer.com/attachment.php?attachmentid=1527&d=1302941974
If you mean the cable that connects Profilux View II to Profilux computer, in the end of Profilux goes this way:
Pin2:Brown
Pin3:green
Pin5:Red
All other pins are without any cables.
http://forum.aquariumcomputer.com/attachment.php?attachmentid=1527&d=1302941974
Hello thx for your help, I did connect it the way you say but no display results
i hope you can help me out,
many thx
Do you have the same colors in the same order to the jack that goes to profilux view ?
(The first photo).
Matthias
18.04.2011, 08:25
1533
1533
hi Matthias,
do you also have the colours with this schematic?
many thx
Matthias
19.04.2011, 11:53
no, the cable varies
I think you should order the cable as replacement part
Thx Matthias,
I would already orderd a new one on your online site but the shipping costs to the netherlands (for a cable a € 7,95) i have to pay €19,- i think is absurt
regards,
Eugene
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.