Cable view 2

[scrub29]

Hello,

I noticed that my display wasn't working after inserting en releasing the connector 100 times last week because of problems with my profilux 3, after shaking a littlebit with the cable the display was working again so i opend the connector and find out that 2 of the 4 cables where lose. does anyone know on what pin what colour cable most be? many thx

[scrub29]

Carolin/Matthias can you help me out with this one? is there a electrical schematic for the serial connector?

thx

[almost]

Hi scrub29,

If you mean the cable that connects Profilux View II to Profilux computer, here is a photo of my cable in the end of Profilux II

http://forum.aquariumcomputer.com/attachment.php?attachmentid=1526&d=1302939609

[almost]

If you mean the cable that connects Profilux View II to Profilux computer, in the end of Profilux goes this way:
Pin2:Brown
Pin3:green
Pin5:Red
All other pins are without any cables.

http://forum.aquariumcomputer.com/attachment.php?attachmentid=1527&d=1302941974

[scrub29]

If you mean the cable that connects Profilux View II to Profilux computer, in the end of Profilux goes this way:
Pin2:Brown
Pin3:green
Pin5:Red
All other pins are without any cables.

http://forum.aquariumcomputer.com/attachment.php?attachmentid=1527&d=1302941974



Hello thx for your help, I did connect it the way you say but no display results
i hope you can help me out,

many thx

[almost]

Do you have the same colors in the same order to the jack that goes to profilux view ?
(The first photo).

[Matthias]

1533

[scrub29]

1533

hi Matthias,

do you also have the colours with this schematic?

many thx

[Matthias]

no, the cable varies

I think you should order the cable as replacement part

[scrub29]

Thx Matthias,

I would already orderd a new one on your online site but the shipping costs to the netherlands (for a cable a € 7,95) i have to pay €19,- i think is absurt

regards,
Eugene