chris69130
06.04.2011, 14:32
Hello Profilux users,
I allow myself to come on this forum in order to have a technical assistance for my installation because there is very little assistance available in France.
I use Profilux III Ex with an expansion box and 2 PAB powerBar.
On my profilux III, there are 3 probe level connected :1 probe (3) on port 2 and 2 probe (1&2) on port 1 with a PL-LY. There are 2 probe level (4&5) connected on the expansion box with a PL-LY too.
I would like to use these probe to run or stop my raising pump. The pump is connected on S1 powerbar. I would like that the pump start only when water is on the top of sensor (3).
I use sensor (1&2) for osmalation: I could find the good parameter for this function with the documentation of the profilux II.
On the other hand, I wish to use sensor (4) for alarm which would stop also the raising pump. The sensor (5) would also have the same function as the sensor (4) but it would be to place at another place.
I hope that my explanations are rather clear and that the translator “google relocates” did his work well.
Thank you in advance for your assistance.
Christophe
I allow myself to come on this forum in order to have a technical assistance for my installation because there is very little assistance available in France.
I use Profilux III Ex with an expansion box and 2 PAB powerBar.
On my profilux III, there are 3 probe level connected :1 probe (3) on port 2 and 2 probe (1&2) on port 1 with a PL-LY. There are 2 probe level (4&5) connected on the expansion box with a PL-LY too.
I would like to use these probe to run or stop my raising pump. The pump is connected on S1 powerbar. I would like that the pump start only when water is on the top of sensor (3).
I use sensor (1&2) for osmalation: I could find the good parameter for this function with the documentation of the profilux II.
On the other hand, I wish to use sensor (4) for alarm which would stop also the raising pump. The sensor (5) would also have the same function as the sensor (4) but it would be to place at another place.
I hope that my explanations are rather clear and that the translator “google relocates” did his work well.
Thank you in advance for your assistance.
Christophe