PDA

View Full Version : what is the proper way to setup for AI sol BLue 3 channel?



larryfl1
28.02.2011, 15:46
I am running the newest software on pf3 and the newest pc6 software...

special in the pc program has no mention of 3 channel of sol blue..

i do see special in the pf3 itself has some new options..but confused..

what is the proper way to enable and setup the 3 channel?

dwsps180
03.03.2011, 17:27
A step by step configuration guide would sure be nice.

Crisis
03.03.2011, 22:38
Yes, I would like to see that as well, I've tried to identify which channel corresponds to which led colour but am unable to get proper results, I'm running 5.06 on pf3 & PC control software.

Matthias
04.03.2011, 08:58
the channel assignement differs (depends on the AI model)

why don`t you just the use the manual light-mixer in "light scenarious"?

then you see immediately what LEDs react on which channel

Crisis
06.03.2011, 03:13
I've done this & found that ch1 royal blue, ch2 blue, & ch3 Is white. Is this normal behavior? I have the super blue

lalasfish
09.03.2011, 19:09
yes it is normal

i changed my sol whites to sol blues ( including driver boards so i can have 3 channel support ) and now under special lamp i have channel1 royal blue channel2 blue and channel3 white..
so i had to reconfigure my timers to match my previous ones...
one thing i noticed is that the fans do not switch off once they kick in..... i have to power cycle the lights to turn off.... there must be a small bug here...

cheers

christos