View Full Version : Cooling via ghl
Devilsbar
26.05.2009, 10:41
Hi, i need to use the computer to control my chiller.
as i am located in south east asia where no heater will be required(it is always hot here)
how do i go about using the controller to control the chilller.
thanks.
Matthias
26.05.2009, 15:59
1. you set the desired temperature for temperature probe 1
2. you assign to the switchable socket where your chiller is plugged in the function "temp1 cool"
that`s it
Devilsbar
26.05.2009, 19:07
so regarding the S6 on the heater, i will just ignore it?
Devilsbar
27.05.2009, 06:41
hi, sorry i am lost on the 2nd step. able to guide me through? thanks.
Devilsbar
27.05.2009, 06:41
i am using on a pc application.
Matthias
27.05.2009, 07:15
you can assign any function to any socket
go to "extras" (or "system" in ProfiLuxControl 4.06) -> "socket function" and edit the socket functions
Devilsbar
27.05.2009, 08:48
ok,i want to set my cooler to chill my tank from 26.3 to 27.3c
this is what i did
http://i12.photobucket.com/albums/a214/nyeo1985/6footer%20tank/socketfunc.jpg
http://i12.photobucket.com/albums/a214/nyeo1985/6footer%20tank/temp1.jpg
Devilsbar
27.05.2009, 08:49
is this correct?
Matthias
27.05.2009, 11:09
yes, sockets 1 and 5 could now switch your chiller if the temp. is above approx 27.3°C
Devilsbar
27.05.2009, 16:25
i only need 1 socket to control the swtich right?
Matthias
27.05.2009, 16:55
if you have only one chiller - yes
Devilsbar
27.05.2009, 20:34
thank you!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.