MAXreefer
22.05.2009, 14:58
I have the Profilux II EX with firmware 4.05
I have done the upgrade to Beta version 4.06 but decided to go back to 4.05 until 4.06 was fully released.
Since I switched back to 4.05 it seems my temperature is about 1 to 1.5 degrees Fahrenheit off. This was not the case BEFORE I did the upgrade but only since I went back.
I compared with 2 different thermometers and the temp display from my chiller.
For example both thermometers show 79 but the Profilux shows 80 to 80.4.
I tried to run the calibration on the controller but this didn't change anything. The controller is only about 2-3 months old.
Any ideas what could be wrong or is there a way I can manually change the temp settings on the controller to match the 2 other thermometers.
Thanks for any help
Michael
I have done the upgrade to Beta version 4.06 but decided to go back to 4.05 until 4.06 was fully released.
Since I switched back to 4.05 it seems my temperature is about 1 to 1.5 degrees Fahrenheit off. This was not the case BEFORE I did the upgrade but only since I went back.
I compared with 2 different thermometers and the temp display from my chiller.
For example both thermometers show 79 but the Profilux shows 80 to 80.4.
I tried to run the calibration on the controller but this didn't change anything. The controller is only about 2-3 months old.
Any ideas what could be wrong or is there a way I can manually change the temp settings on the controller to match the 2 other thermometers.
Thanks for any help
Michael