PDA

View Full Version : AI control of all 3 channels white, blue, Royal Blue?



larryfl1
11.12.2010, 22:08
AI has now released the new firmware for their controller to have separate control of all 3 channels...white, blue , royal blue

when will the profilux be capable of handling the 3 discrete channels?

Rotknee
14.12.2010, 19:29
+1

I was just going to ask the same question on RC but thought I would check here first.

Matthias
16.12.2010, 08:28
we got feedback from Aqua Illumination - they don't want to give us the technical details before January (no date available so far)

-> we can't do anything in regards to our firmware at the moment

Matthias
16.12.2010, 08:29
Has anyone the new 3 channel AI lamp yet?

if yes - please send me a PM

larryfl1
16.12.2010, 13:21
pm sent

Crisis
22.01.2011, 00:59
Hi Mathieus, I have new AI light, can you assist with control of all 3 channels?

GHL Support
22.01.2011, 14:13
Please sent a PM to Matthias - thanks.

Crisis
22.01.2011, 18:38
Done, I have discovered a problem, when I set the Illumination 1 & 2, to 100%, on the Display is only shows 30% & 28%? Is this a bug? Can the light be properly controlled?

Matthias
24.01.2011, 10:33
I don't understand this post

Crisis
24.01.2011, 13:45
Hello Matthaius what I'm trying to say if I configure Illumination 1&2 in pcl 5 to 100% & save the configuration to the p3, on the display of the p3 it only shows Ilimination 1&2 at 30% & 28%, I don't see it ever going to 100%. illumination 1 is configured for white led & Illumination 2 is configured for blue led.

Matthias
25.01.2011, 11:49
the display shows the actual brightness which is defined by the illumination settings you have made

Crisis
25.01.2011, 15:11
This is what I am trying to say, the actual Illumination config is set for 100% both white & blue, but the display isn't show 100%, it only shows 30% & 28%. I have a theory could it be that when you config Thunderstorm, rainy days, cloud simulation that these actual figures never get to 100%?

Matthias
25.01.2011, 17:46
it could be all of them or the moon simulation

-> just switch off all simulations and watch what happens

Crisis
25.01.2011, 20:42
Hi Matthias, just tried that, the max the p3 was displaying was 74% for white, & 72% for blue, I had them set for 100% with pcl program, & disabled clouds, thunderstorm, rain, & moon phase.

Matthias
26.01.2011, 08:49
please post screenshots of the relevant illumination settings

Crisis
27.01.2011, 01:38
Hi Matthias, I will send screenshots in an email to you.

richard.mayo
04.06.2011, 10:18
Did this ever get resolved, I would like to get the AI LEDs but don't know if the Profilux can handle it...

Crisis
04.06.2011, 18:09
Yes, it did, I think as of 5.06 it was added, & you now have control of all three colours, I'm running 5.09 firmware on my P3, & all is good.

richard.mayo
05.06.2011, 01:25
Cool thanks, appreciate you coming back and letting us know

What connection does the AI GHL cable use?? I cant find any information

Thanks

Crisis
05.06.2011, 03:42
It's the serial cable, available either thru profilux or AI http://ghl-direct.com/proddetail.php?prod=profiluxAI

Baumbart
09.08.2011, 10:22
Hi GHL Team

Is there any time soon a fix for the new AI lights,
(control of all 3 channels white, blue, Royal Blue)?

Matthias
10.08.2011, 07:33
ProfiLux supports AI 3 channel lamps already!