richard.mayo
29.10.2010, 10:34
Firstly im very very angry with the support so far, ive owned this paperweight for 4 days now and its still not working, the manual is terrible and has little to no information what so ever, the device, and the software is confusing as ever (by the way im actually pretty good with computers, so its not me) i have no idea how you can expect people to figure this out or do you assume that everyone will come to the forum for help.....
So here goes
OK, i thought i would start a new thread about this, here is the current problem im having...
OK tried a new PAB cable from my PAB power bars, still not working.
This is what is have
Firmware Vortech Controller 1.01
Firmware Controller Interface 0.
Firmware RF-Module 0.
When i try to update the Controller_Interface_OS (V1.02) i get a "Error! Couldn't start update" error and the same when i try to update the RF_Module_OS (V1.02)
I have tried un-assigning and re-assigning, restarting the P3EX, restarting the controller... nothing is working.
On the controller the orange light is blinking in time with the powerbars and the green light is solid, no blue and red lights are on.
I have noticed that when i click on the Vortech Overview in the software that the orange light on the powerboards and the Vortech Controller stop and then after a few seconds blink and then come quite speratic with no real timing, as if there is a connection problem
So here goes
OK, i thought i would start a new thread about this, here is the current problem im having...
OK tried a new PAB cable from my PAB power bars, still not working.
This is what is have
Firmware Vortech Controller 1.01
Firmware Controller Interface 0.
Firmware RF-Module 0.
When i try to update the Controller_Interface_OS (V1.02) i get a "Error! Couldn't start update" error and the same when i try to update the RF_Module_OS (V1.02)
I have tried un-assigning and re-assigning, restarting the P3EX, restarting the controller... nothing is working.
On the controller the orange light is blinking in time with the powerbars and the green light is solid, no blue and red lights are on.
I have noticed that when i click on the Vortech Overview in the software that the orange light on the powerboards and the Vortech Controller stop and then after a few seconds blink and then come quite speratic with no real timing, as if there is a connection problem