PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Problems connecting profilux doing pump



68darius13
30.04.2009, 19:17
The pump adapter is plugged into the mains and the power light is green. The communication cable is plugged into the left socket on the dosing pump. As soon as the communication cable is plugged into S5-S8 socket on the profilux computer, the 1st pump starts spinning and does not react to anything.
I don't know what I'm doing wrong.
Regards Darius

Gilles
30.04.2009, 21:47
Hello Darius, have you set in the software that you have connected the dosing pump to that socket? In other words; the profilux must know you connected the dosing pump, it will not work by itself. Please refer to the manual for further instructions.

Matthias
01.05.2009, 11:46
yes, Gilles is right, you first have to set the functions of the sockets 5 ... 8 to dosing 1 ... dosing 4