Program digital powerbar / dosing NOT working as it should

[Gilles]

I have a PIIIex with the latest firmware and PLC, with PAB powerbar.

There are some issues i have:
1) I can't change the numbering of the PAB powerbar, it is always 1-6

2) I can't change the numbering of the dosing station. If i set it to 21 to 24 (on S1-S4) it is not saved.

3) Connectoin to S5-S8 does not seem to work either when setting it to the max. (45-48), have not tried other ports

4) When re-opening the 'program powerbar screen' the settins are reverted to 1 instead of showing the current programmed sockets.

Please fix this in PLC6

[GHL Support]

Changing the numerbing of a PAB Powerbar is (at the moment) only direct on the ProfiLux possible.

System->Configure PAB->Configu. device->(select PB-Serial)->Set numering

[Gilles]

Hi oke, did not know that. Does a firmware update also reset the PAB nubmering?

[GHL Support]

No, a firmware update (no matter updating ProfiLux or PAB-Powerbar itself) doesn't change the settings of the PAB-Powerbar.