Can I add a 4 plug/socket Analog powerbar

[weese3]

I currently have 2x Digital 6 socket powerbars running on S1 through S12 and 2x 4 station dosing pumps running on S13 through S20. Can I add/daisy chain the 4 socket analog powerbar in on S21-S24 or will I have to change everything around???

Thanks

Adam

[GHL Support]

Hello,

the analogue powerbar can't be daisy-chained like the digital powerbars and the dosing units. It can only be used then at S5-S8 or at an extension card with a further S-socket like PLM-2L4S.

[weese3]

Thanks for the quick response Carolin.. I should have been more specific in my first post :-) I am running a Profilux Plus II EX if that makes a difference :-)

If i use it at the S5-S8 position I will just have to re-assign everything else to new socket positions and be good to go without the PLM-2L4S??

[GHL Support]

Yes, if socket S5S8 is still free, then you have to connect the analogue powerbar here and have to reassign the socket numbers at S1S4 from S1 to S4 and S9 to S24.
Unfortunately there is no other solution...