Gullforce
08.08.2010, 12:59
G'day,
I have recently added an expansion box to my Profilux III. I have set the EB up via PAB and have it approx 50 metres away from the III Ex. In the EB I have also installed a new humidity / Air temp module.
The problem is I am unable to see or read anything that is plugged into the EB, with the exception of the added module (air Temp and humidity) - which is working perfectly.
I have tried temp probe, cond probe, light stick all to no avail.
I have tested all probes on the IIIex which gives correct readings, I have tried shorter network cable, and reseting both the EB and the IIIex.
During assign devices on the IIIex, the EB is visable and is selectable.
I am not sure what else to try?
I have recently added an expansion box to my Profilux III. I have set the EB up via PAB and have it approx 50 metres away from the III Ex. In the EB I have also installed a new humidity / Air temp module.
The problem is I am unable to see or read anything that is plugged into the EB, with the exception of the added module (air Temp and humidity) - which is working perfectly.
I have tried temp probe, cond probe, light stick all to no avail.
I have tested all probes on the IIIex which gives correct readings, I have tried shorter network cable, and reseting both the EB and the IIIex.
During assign devices on the IIIex, the EB is visable and is selectable.
I am not sure what else to try?