extension cable

[wim]

Can't find a extension cable for use with the humidity-temp.sensor.
Where to buy, or else what to do?
(female RJ12 jacks are not on the market to my knowledge, so making - without soldering- an extension myself is not an option)

Help!

[Wirus]

Where to buy, or else what to do?

You can use a standard cable male-male and a coupling female-female - I think, you can get that in every phone store
http://www.reichelt.de/bilder//web/artikel/G100/WB2X6_4.jpg

[GHL Support]

Not 100% right. There are some coupling female-female on market witch have some crossed wires inside. If you buy one of this you will damage the sensor and the Profilux.

[wim]

Wirus, telephone plugs are 4/2 or 4/4, I need 6/6 (RJ12)
Martin, like I said: there are no female 6/6 plugs on the market as far as I know.
So, what to do? Just cut the cable and and make an extension by soldering?

[Wirus]

Wirus, telephone plugs are 4/2 or 4/4, I need 6/6 (RJ12)

The shown one is a WB 2X6-6 RJ12 from a german dealer for electronic components. It has the needed 6 contacts.

If you search for ISDN equipment, you may find the needed coupler. But, as Marin said: Check that it´s 1:1

[Matthias]

ISDN has usually 8 pins

why don't you just buy our extension cables? VSL-2, 5 or 10

http://www.aquariumcomputer.com/System__E_/Products/Accessories/accessories.html

[wim]

Thanks Matthias, I am new in this field. The extension of the hum-temp sensor is not mentioned for the VSL cables, that's why I missed it.

Thanks to all of you for your help.
Problem solved!