P3 can't Power On

[capri]

Failed in firmware upgrade. Proceeded as instructed but when resetting P3 failed to power up. Plugged and unplugged many times. No power.

[boboxx]

Are you using the internal jumper and FlashFR or just trought FlashFR??

You dont see anything on the screen when you are using FlashFR.

Just doing a firmware will not damage the hardware.... you probably have a bad firmware load.

[capri]

Problem solved. Thanks.

[boboxx]

What was the problem?

[Blahenazo]

Failed in firmware upgrade.

^^^ probably :)

[capri]

Right, failed upgrade.