PDA

View Full Version : Tunze 6055 not working as expected



Paul
18.03.2010, 23:10
HI There,

I have a tunze 6055, I have set my pump and voltage settings, but all it does is turn the pump on for 1 second every 30, I was expecing a sine wave flow.
Unplugging Tunze1 cable from L1/2 socket returns pump to standard constant on as per voltage setting (im using 12v as I dont need massive flow).

Can you help? Settings below.
Paul

http://paulsfishtank.co.uk/photos/pump.JPG

http://paulsfishtank.co.uk/photos/volts.JPG

Matthias
19.03.2010, 08:56
I wonder why 0% is displayed for state of pump 1 - it should be something between 10% and 100% according to your settings

is there a feed pause active?

Firmwareversion? ProfiLux model? ProfiLuxControl version?

Paul
19.03.2010, 10:26
I have a profilux plus II, it running the latest firmware 5.00 (dated 110210) and the latest control program.

As far as I know no feed timer is active, in that I have not pressed Escape and certianly more than 5 mins has eleasped while testing (more like 5 hours).

I have never seen the 'state' change.

Thanks for the support, is there anything I can try?
Paul

Matthias
19.03.2010, 14:00
what are the current pump settings regarding feed pause?

try "not involved"

Paul
19.03.2010, 16:50
I'll check tongiht and report back, thanks for the tip
Paul

Paul
19.03.2010, 19:55
That did the trick!
Thank you so much :D
Paul

Matthias
21.03.2010, 10:18
it seems the feed pause is activated somewhere
-> check your timer settings

Paul
23.03.2010, 21:35
Youre quite correct, had a rouge timer from when I was playing, deleted it and now everything is fully functional

Thanks!