View Full Version : Temperature Display
Having trouble getting the temperature to display on the device screen and through the web. The temperature is fine within the application.
i have clicked the appropriate box within the application
wondering what i have done incorrect
Matthias
17.03.2010, 08:32
after setting the correct check mark and saving this under "display" you should see it
I see my temp on the main ProfiLux Display. I do not see my temp on the remote display.
Tom R
Matthias
17.03.2010, 17:23
what is the remote display?
ProfiLux view?
My PC connected on via RS232 connection.
Matthias
17.03.2010, 17:35
I guess it is printed in the third line
-> remote control is working for PII, for P3 not for all lines -> comes in one of the next updates
The remote view also show that it is in ALARM mode yet the ProfiLux does not show an ALARM at this time. I have checked all connections and there is no ALARM present, yet the remote view shows one.
Tom R
Blahenazo
17.03.2010, 18:20
I guess it is printed in the third line
-> remote control is working for PII, for P3 not for all lines -> comes in one of the next updates
if it's a P3 its normal , on my remote control in PLC on my P3 it's also an alarm
I am confused.
Will this be fixed?
The remote view should only show an ALARM if the ProfiLux screen shows an ALARM and there is an actual Alarm.
Tom R
Blahenazo
17.03.2010, 19:45
I agree but if its on the remote PLC then I'm quite sure Mathias also knows this :)
But Mathias said it will be fixed in the future.
We just need to have some patiences.
Blahenazo
17.03.2010, 19:58
I agree and I quite sure Mathias also knows this :)
But Mathias said it will be fixed in the future.
We just need to have some patience
Matthias
18.03.2010, 08:10
thanks for the hint - at least the LED issue has been fixed for 5.0.0.12
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.