ahellary
11.03.2010, 19:07
hi guys have just got a p3 ex and it came with 5..0.0i and id like to update it to the latest version ..... before i do too much
i have the proficontrol 5.0.09 i have 2 lap tops one vist 64 bit and the other vista 32 bit both business versions i have the laest usb drivers on both pcs av responce tine is 56 ms
after i say yes to the down load on both the pc and the controller it says erasing flash then after a while i get the error flasherase no responce -8
both pcs exibit the same problem
im new to the controler but im a pc profesional
im a little dissapointed that i cannont update neither pc has a rs232 port but both have lan ports and the lan is set on the controler and you cannot update that way either i haqve looked at the flash tool and that has 2 errors when the device is off it cannont find the com port tried the switch on with in a couple of seconds still no good it looks like im stuck with the older verion which isnt very good
please help as id like to move forward
i have added 2 exra cards in the unit a second redox interface and a card for 2 more lighing connections ... as yet i havent puggen in any sockets i have the pab set
i have the proficontrol 5.0.09 i have 2 lap tops one vist 64 bit and the other vista 32 bit both business versions i have the laest usb drivers on both pcs av responce tine is 56 ms
after i say yes to the down load on both the pc and the controller it says erasing flash then after a while i get the error flasherase no responce -8
both pcs exibit the same problem
im new to the controler but im a pc profesional
im a little dissapointed that i cannont update neither pc has a rs232 port but both have lan ports and the lan is set on the controler and you cannot update that way either i haqve looked at the flash tool and that has 2 errors when the device is off it cannont find the com port tried the switch on with in a couple of seconds still no good it looks like im stuck with the older verion which isnt very good
please help as id like to move forward
i have added 2 exra cards in the unit a second redox interface and a card for 2 more lighing connections ... as yet i havent puggen in any sockets i have the pab set