PDA

View Full Version : Split Tunze control with single port...



PEA
04.03.2010, 23:10
Would I be able to control two Tunzes with a single L port? The problem is that my 1-10v ports are all full. Right now I have a single Tunze 6055 connected with Tunze 1 cable and L1. If I get another Tunze 1 cable and another splitter would I be able to connect another 6055 and control both Tunze so they do the same thing. I just want them to do the same sinus pulse wave. Just need abit more flow in my 135 gallon tank.


Thanks!

boboxx
04.03.2010, 23:48
yes you can use the YL2-1 splitter. if you connect 2 Tunze1 cable, both pump will operate the same. If you get a Tunze1 and Tunze2 cable both pump will work independently.

There are a few length of cable available on the YL2 if you need shorter or longer cables.

PEA
05.03.2010, 00:44
Even if I have something else already split with the YL2-1 splitter. So my L1-L2 is controlling my 6055 and my dimable T5. So I'd be chaining two YL2-1 splitters so effectively I'll have 3 things connected to my L1-L2. So two 6055 on L1 and my dimable T5 on L2.

Should work?

boboxx
05.03.2010, 01:17
ho sorry, well you can add one more YL2 but make sure to get a Tunze1 cable so that they are controled on the same line (L1)

PEA
05.03.2010, 16:32
So I CAN have two YL2-1 splitter chained on the same port provided I want to control the same thing and have the two pumps doing the same thing?

Thanks!

boboxx
05.03.2010, 16:42
yes you can

PEA
05.03.2010, 16:53
Thank you! That's exactly what I need!