View Full Version : Calibration Guide
Is there a step by step guide on how to calibrate all the probes you could connect to a PIII? Maybe a sticky idea?
Looking to calibrate my Conductivity probe but not fully sure the exact steps I should be doing, what if anything I need to do on the controller or how long it should be left in the solution?
Thanks,
Jason
Matthias
19.02.2010, 16:53
it is quite easy - select the sensor and start the calibrate function on the device itself
the calibration process is explained in the manual
Thanks, it was my first time! :rolleyes:
it is quite easy - select the sensor and start the calibrate function on the device itself
the calibration process is explained in the manual
i am sorry i do not understand
i am trying to calibrate ORP with no luck. i cannot find it anywhere in the manual or within the GHL software.
What am i missing?
Matthias
18.05.2010, 09:29
1.3 Calibration
Maverick38
24.05.2010, 21:36
A quick look at the manual of the PII will probably be sufficient ;)
I have just found there the calibration process for the ORP probe and it solved my problems ... :)
Mav'
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.