I need to connect KH director this way.

[JaviVG]

Hi.
I need to connect KH director this way.
Profilux4 -> Powerbar 5.1 -> Doser 2.0 -> KH director -> Doser 2.1
PAB will work properly?
System could be possible to increase the KH by turn on a switch of the powerbar. (There is a feeder with carbonate).

[Vinny]

Yes, that is fine.
The PAB-system allows to you to connect any PAB-device in the order you want.

If you go to the switch channels page and select an outlet, you will see the option to trigger this outlet based on the test result of the KH Director; up and down control.

[JaviVG]

OK

[JaviVG]

Sorry another question.
My carbonate feeder works 8 times a day. Drop down a small amount of it. It works pretty fine, but corals are growing and I´m gonna add more of them.
The Eheim feeder takes a autochecking turn when the switch is on. After 10 secs the switch is off.
System could be possible to turn on the switch. But system could be possible to turn off the switch after 10 secs?
System could be possible of increase-decrease the times per day feeder turns?

[JaviVG]

It´s possible. I tested it by a virtual dosing pump, Nº9 and a virtual switch, Nº11. Using PH probe.
Setting 2 programmable logics,
Switch 6 (feeder carbonate). PL 2-> Timer 3 - Pump 9 (XOR)
Switch 11 (virtual). PL 3-> PH control upwards (pulse 10 secs)
And pump 9 (virtual), Pump reacts to switch channel 11.

Switch 6 is turn on if dose button of pump 9 is pressed. If ph value needs increase it turns on 10 secs.
After install KH Director , it will use pump 9 to increase kh.
Setting 1ml, that is 10 secs more or less.
To decrease? Maybe possible, but i think i will not need it.