PDA

View Full Version : Cant find the sms module in gcc


Hossam
12.11.2019, 01:55
I have profilux 4 and cant connect the module via the pab and i dont find it in the gcc...
What can i do?
Hossam
12.11.2019, 02:50
https://uploads.tapatalk-cdn.com/20191112/37986e1eea97eb4368bae15eafe9c5cb.jpg


Sent from my iPhone using Tapatalk
Thilo
12.11.2019, 08:53
It may take a few minutes for the device to be detected after it is switched on. Please wait a few minutes and then check if it is listed under 'Assign devices'.
Hossam
12.11.2019, 11:37
Thank now it works.
Its just sending sms or also calling?


Sent from my iPhone using Tapatalk
Thilo
12.11.2019, 12:50
It just sends SMS.
Hossam
12.11.2019, 12:55
Ok thank you


Sent from my iPhone using Tapatalk
Hossam
25.11.2019, 14:26
Hey what the meaning of: “send interval” and what the differences between: cyclic, at certain time, just new, just over?
Because one day i hade an alarm and it sent to me 12 times.


Sent from my iPhone using Tapatalk
Thilo
25.11.2019, 14:46
Hi,

please check the manual: https://www.aquariumcomputer.com/downloads/sms-module-pab-manual/

cyclic will send it cyclically,
at certain time will send it once a day,
just new sends it evrey time when there is a new alarm
and just over every time when an alarm is over/solved
Hossam
25.11.2019, 16:50
Thank you very much


Sent from my iPhone using Tapatalk