PDA

View Full Version : New P3 no Redox calibration option



MitchM
24.01.2010, 18:09
Hello,

On my new P3, I have calibrated all sensors except for the redox. When I scroll through the redox sensor menu, calibration is not one of the choices. Are there new instructions for that?
:confused:

Thanks,
Mitch

MitchM
24.01.2010, 20:50
Solved.
It looks like the power plug on the back of the expansion box had become partly dislodged just before I started calibrating the redox probe.
It's too bad that there is no power indicator light on the expansion box so that it is easier to tell whether there is power to it or not.
:(

Mitch

Blahenazo
25.01.2010, 17:29
Solved.
It looks like the power plug on the back of the expansion box had become partly dislodged just before I started calibrating the redox probe.
It's too bad that there is no power indicator light on the expansion box so that it is easier to tell whether there is power to it or not.
:(

Mitch

There is no led on the ex box, I had the same problem when I started playing with the Ex box. Some sort of icon that the PAB and the exboxes are ok would be ideal ! maybe for rev 2 :) they can add the led :)