ORP and timer in one

[Bagirka]

Hi,
I have Profilux 4 full set...
I'm using Ozone reactor and have connected the Ozone generator to Bar 5.1 plug

At the moment I can only operate it either on timer or under Redox probe readings

I would like to use both at the same time. I would like to set the timer switching on few times a day and IF ORP is above set point it would switch off

So I went to
Programmable logic

Input 1 - I chose timer (selected the created time schedule)
Input 2 - I chose OR Redox 1 with value settings,

Then I assigned this programmable logic to my plug but .....
The problem I have is that it only still operates under Redox probe and switches the ozone generator on until the nominal value is fully reached

I would like the timer to switch the generator on only for few times a day so the ozone doesn't get pumped in at once while staying off after that for days until it falls back to normal values.

Basically I need
Timer - One hr on then few hrs off... few times a day and IF ORP above 380 then OFF

How do I do this please?

Many thanks!

[Bagirka]

It seems to work on Equal not on OR

[john nakos]

Hi
Use "and"