PDA

View Full Version : P4 just keeps going into stupid mode



myprofilux
08.09.2018, 15:50
Hi all,

Not to sure what to do anymore. I have P4 and this has happened since updating to the firmware(s) included in GCC - 1.x.x.16 all the way to the latest firmware in GCC - 1.x.x.18 and before I get a question :) what firmware are you running it was the one released with 1.x.x.18. - 716.

What I have tried:
1. Restore Factory
2. Erase the web/wifi filesystem and reinstall (even though I know / been told it has no effect on the main firmware.
3. Unplugged all sensors PAB's etc.

What happens:
1. At a random time - sometimes 30mins, sometimes 1 hour sometimes a day. The P4 just freezes.

What does freeze mean:
1. It is like it doesnt exisit. Physically its "on" I can see the screen its changing txt every 2 seconds (as I have set it to) text = Sensor info etc.

What I cant do and the effect it has to my aquarium
1. Cannot connect to it via USB
2. Cannot connect to it via webinterface
3. Its down on myghl
4. Cant ping it
5. Cant send it smoke signals. (I have tried everything)

Really need help here this system is now just an issue if I can't rely on it.

MatthiasF
11.09.2018, 07:39
Hello,

this is really strange that all communication gets unresponsive like this, although being independent from each other.

In order to track this down open a support-ticket and give us system information like serialnumber, myGHL-ID.
With this information we will try to watch the states.

https://www.aquariumcomputer.com/support/tickets-enquiries/

myprofilux
11.09.2018, 08:21
Done logged with serial number