myprofilux
21.06.2018, 10:24
Hi GHL team,
I dismantled my GHL setup to connect my Doser 2 via PAB directly to my P4. This was so that I could flash the firmware From 1.24 to 1.28.
I tried the following: Normal process (not unplugging or plugging back in)
1. Make sure all other PAB are disconnected
2. Reset all PAB
3. Reassign PAB only Doser 2.0 picked up
4. Assign
5. Go to > System > expand > go to Doser 2.0
6. Go to Firmware Upgrade.
7. Foll these steps: attached
I then thought maybe it's the jump from 1.24 to 1.28, proceeded trying to do it in sequence. 1.24 1.26 1.27 1.28.
Same outcome.
8. I then tried the "emergency" flash basically same process but you unplug power and plug in immediately note the immediately and click OK.
Same error
Lastly I tried different "immediately" from 1 second to 4 second to lastly 8 seconds. Yes I timed it.
All ended up in an error.
I haven't put the setup back together as the work to do so is time consuming. I can still access the doser via PAB if I assign it so its not malfunctioning.
Using
GCC 1.x.x.16
Firmware 7.14
Woukd really appreciate the help as the house and fish room are all over the place with me having to dismantle all my GHL devices.
https://uploads.tapatalk-cdn.com/20180621/96fadd6d56c9db016d63d683e3be7e7d.jpghttps://uploads.tapatalk-cdn.com/20180621/5dd9c1354c8a9688bb6169d1fc5b0155.jpghttps://uploads.tapatalk-cdn.com/20180621/37bc16598234dc7ed5d59f4347206e9a.jpghttps://uploads.tapatalk-cdn.com/20180621/84e25a8c7e755a779a04c36fc751f555.jpg
I dismantled my GHL setup to connect my Doser 2 via PAB directly to my P4. This was so that I could flash the firmware From 1.24 to 1.28.
I tried the following: Normal process (not unplugging or plugging back in)
1. Make sure all other PAB are disconnected
2. Reset all PAB
3. Reassign PAB only Doser 2.0 picked up
4. Assign
5. Go to > System > expand > go to Doser 2.0
6. Go to Firmware Upgrade.
7. Foll these steps: attached
I then thought maybe it's the jump from 1.24 to 1.28, proceeded trying to do it in sequence. 1.24 1.26 1.27 1.28.
Same outcome.
8. I then tried the "emergency" flash basically same process but you unplug power and plug in immediately note the immediately and click OK.
Same error
Lastly I tried different "immediately" from 1 second to 4 second to lastly 8 seconds. Yes I timed it.
All ended up in an error.
I haven't put the setup back together as the work to do so is time consuming. I can still access the doser via PAB if I assign it so its not malfunctioning.
Using
GCC 1.x.x.16
Firmware 7.14
Woukd really appreciate the help as the house and fish room are all over the place with me having to dismantle all my GHL devices.
https://uploads.tapatalk-cdn.com/20180621/96fadd6d56c9db016d63d683e3be7e7d.jpghttps://uploads.tapatalk-cdn.com/20180621/5dd9c1354c8a9688bb6169d1fc5b0155.jpghttps://uploads.tapatalk-cdn.com/20180621/37bc16598234dc7ed5d59f4347206e9a.jpghttps://uploads.tapatalk-cdn.com/20180621/84e25a8c7e755a779a04c36fc751f555.jpg