PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : myGHL Connection Failed - WiFi module 6718 firmware update



brianmsu80
18.06.2018, 18:00
I attached the error message I receive when I try to login to myGHL from my iPhone over cellular only or WiFi. Also same message from a desktop computer on WiFi.

I cannot find a WiFi module 6718 firmware update, is there one?

My P4 firmware version is 7.14 and WiFi module is 6619

Thanks, Brian

brianmsu80
18.06.2018, 18:54
Actually, I'm on WiFi module 6708 now and I'm still getting that same error about needing 6718.

My P4 firmware version is 7.14 and WiFi module is 6708.

ReefClownMIA
18.06.2018, 19:20
You can update your WiFi firmware with the update tool:
https://www.aquariumcomputer.com/downloads/wifi-module-esp-update/

brianmsu80
18.06.2018, 19:25
The updater tool gave me version 6708. So I think I have the latest

But the error message I get says I need version 6718 per attachment above.

PIWAWT
18.06.2018, 23:37
You can download the latest firmware here (https://mega.nz/#F!Qqgw2ZpJ!jHnBO9SHYfNgHKMD158SZA!w7wzxBgR), and replace the firmware. bin in the folder WiFi firmware update tool

regards Pit

brianmsu80
19.06.2018, 02:22
You can download the latest firmware here (https://mega.nz/#F!Qqgw2ZpJ!jHnBO9SHYfNgHKMD158SZA!w7wzxBgR), and replace the firmware. bin in the folder WiFi firmware update tool

regards Pit

Thank you for that link. I installed 6737 and power cycled, but still receive the same error message in the original post.

KevinR
19.06.2018, 02:32
Add the device again and see if it works. I had the same issue and when I added the device again with the same ip it worked?

brianmsu80
19.06.2018, 03:51
10837
Add the device again and see if it works. I had the same issue and when I added the device again with the same ip it worked?

Thanks for the idea. So I removed it and tried to add back but here is the screen I get now. So similar issue.

CraigH
12.07.2018, 10:00
Any news on this issue? I'm having the same with my 3 Mitras - I've never been able to get them to connect to my GHL. My P4 works perfectly and they're all up to date.

Can the numbers be checked at all?

MatthiasF
12.07.2018, 11:36
Hello Craig,

if your Mitras LX7 are running at least WiFi-version 6718 and are connected to myGHL this should work without a problem.
Check in GHL Control Center->Communication the WiFi Status for getting the connection information.

When this seems to be fine, please open a Support-Ticket and give us all details of the fixtures (myGHL-account, myGHL-IDs, serialnumbers) for further assistance:
https://www.aquariumcomputer.com/support/tickets-enquiries/