PDA

View Full Version : P4 Webpage



myprofilux
28.05.2018, 19:12
Hi all,

On my old Profilux 3.1 you could go to the web page and it had a really nice view. I had the Sensors tab always open on a iPad. Now with the P4 there isnt something like that (I use windows as well).
What replaced it?

Vinny
28.05.2018, 20:15
In order to view the new web interface, your P4 will need to be running on the newest P4 firmware, WiFi module firmware, and Web interface version. The web interface is a replica of what you see when you connect using the GHL Connect app.

Download the newest version of GCC to bring your firmwares up to date. We have YT videos that walk you through how to do these steps.

myprofilux
28.05.2018, 20:25
In order to view the new web interface, your P4 will need to be running on the newest P4 firmware, WiFi module firmware, and Web interface version. The web interface is a replica of what you see when you connect using the GHL Connect app.

Download the newest version of GCC to bring your firmwares up to date. We have YT videos that walk you through how to do these steps.


I have 7.12 firmware running 1113 GCC. Should i have higher?

myprofilux
28.05.2018, 20:29
In order to view the new web interface, your P4 will need to be running on the newest P4 firmware, WiFi module firmware, and Web interface version. The web interface is a replica of what you see when you connect using the GHL Connect app.

Download the newest version of GCC to bring your firmwares up to date. We have YT videos that walk you through how to do these steps.

PS I have Web Version 1.02 and Wifi version: 6619

MatthiasF
29.05.2018, 07:29
Hello,

we made a new webinterface available, which is bundled in the GHL Control Center or you can download from our page:
https://www.aquariumcomputer.com/downloads/wifi-modul-esp-update/

This includes a manual for upgrading the webinterface via 'File transfers'.

myprofilux
29.05.2018, 12:04
Thank you sir will have a go at it! Thanks for the response.

Sent from my SM-G965F using Tapatalk

myprofilux
29.05.2018, 14:25
Hello,

we made a new webinterface available, which is bundled in the GHL Control Center or you can download from our page:
https://www.aquariumcomputer.com/downloads/wifi-modul-esp-update/


This includes a manual for upgrading the webinterface via 'File transfers'.

Followed the instructions to the tee and I get :

1. File check succeeded
2. An error occurred during the operation

When I go to http://<Ip_Address> ->> I get the password prompt, type that in. I get a Profilux 4 Logo and the menu of Dashboard and Settings but that is it nothing new nothing useful.

Any advice (web version 1.02)

Running GCC - 1113 (have 1114 installed but change log does not say much on the Web Server so didnt use that). It takes me to: http://<Ip_Address>/#/app/dashboard, which shows me the just a Profilux 4 logo.

MatthiasF
29.05.2018, 15:02
Hello,

there is a video tutorial for you showing the upgrade:
https://www.youtube.com/watch?v=F-cH-xJmiwU
Also, when the error occurs, you can try to redo the upload. Under some rare conditions, this helped some users already.

If the above procedure does not help, do the upgrade with the wifi-update-tool and the ProfiLux4's USB connection,
like it is described in another very good video tutorial:
https://www.youtube.com/watch?v=6z_7fhzJL-Q

myprofilux
29.05.2018, 15:02
Hello,

there is a video tutorial for you showing the upgrade:
https://www.youtube.com/watch?v=F-cH-xJmiwU
Also, when the error occurs, you can try to redo the upload. Under some rare conditions, this helped some users already.

If the above procedure does not help, do the upgrade with the wifi-update-tool and the ProfiLux4's USB connection,
like it is described in another very good video tutorial:
https://www.youtube.com/watch?v=6z_7fhzJL-Q

Will try now and let you know

myprofilux
29.05.2018, 15:58
Ok so did the normal "Start" did the flash but nothing happened. Tried four times.

Then did the reflash eprom option, took a while. Reset the WiFi settings, admin and password. IP settings etc

Cleared cache of the browser, logged in and presto worked.

Am I right in saying that eprom flash only clears the data for the WiFi module and that related file system I. E. Doesn't touch other profilux settings?

Sent from my SM-G965F using Tapatalk

Vinny
29.05.2018, 20:22
Glad to hear it worked out for you.

When flashing the WiFi module, only the module gets changed. Nothing is changed with the ProfiLux settings itself.

myprofilux
29.05.2018, 20:34
Got it thank you makes sense. Good design that!

Sent from my SM-G965F using Tapatalk