PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Expansion Box Issue



KevinR
15.02.2018, 00:43
My First Issue if I power down my expansion box I do no receive a PABCOM error. Below is my box and software version.

10279

Second this might be me not doing something right but I can not set the Conduct (Salinity Port to any value but uS)

10280

Matthias
15.02.2018, 08:09
Hi

let us split this in 2 parts.

First to the easy one, change Cond-Port that way:

1. select EXB in system
2. click config
3. adjust input
4. save
5. assign PAB-devices (now the EXB will be assigned again, but the newly changed cond-port will be considered)

10281

Matthias
15.02.2018, 08:11
My First Issue if I power down my expansion box I do no receive a PABCOM error.

what does this mean? you have a PABCOM error when EXB is plugged in and it disappears when you unpower the EXB?

when you unpower EXB also the communication to all devices after the EXB will fail

please some more details, we don't understand the question

KevinR
15.02.2018, 11:04
I tried what you said above on my Expansion box to configure the port, which is connected off my P4 and I get this:
10282

KevinR
15.02.2018, 11:05
For Example, if I reboot the EXT box I never receive a PABCOM Error or any device off the Expansion box.

alekslyse
15.02.2018, 11:15
For Example, if I reboot the EXT box I never receive a PABCOM Error or any device off the Expansion box.

From what I know to use configure on that one (might be related to the GCC version, but never tried anything else) is to connect only the EXP to your P4 (disconnect other PAB devices) and click configure - then you can configure it.

KevinR
15.02.2018, 11:56
From what I know to use configure on that one (might be related to the GCC version, but never tried anything else) is to connect only the EXP to your P4 (disconnect other PAB devices) and click configure - then you can configure it.

I will try this tonight when I get home.

KevinR
17.02.2018, 13:25
I was able to configure the Expansion Box without any PAB devices connected thanks!!