PDA

View Full Version : KH Director und Triton Methode



Skymario
19.01.2018, 18:20
Hallo

Hätte Interesse an einen KH Director , wie würde es mit der Triton Methode funktionieren ?
Beim Doser 2(2.1) wäre bei Balling usw Kanal 4 für die KH Lösung vorgesehen, bei der Triton Methode wäre KH in allen 4Flachen verteilt , also 4 Kanäle 🤔
würde es mit einen zusätzlichen Doser2Slave funktionieren ?

Zur Zeit laufen meine Doser2 mit der iOS App , würde das auch mit dem KH Director noch funktionieren ?

Vieleicht gibt es schon Erfahrungswerte

lg

alekslyse
19.01.2018, 18:32
Yes this is fully possible. Im running the Triton method with the KH Director, and its a perfect match. Im running Profilux 4 and letting the KH Director control my 4 doser heads for Triton to keep the KH at 8. This is handled automatically by KH Director.

Skymario
19.01.2018, 18:48
Hallo Alekslyse


How does this work with the KH Director with the dosage distributed over 4 channels? is only channel 4 for KH intended for it
For Triton, dose 4x x ml to keep KH 8
Do you have instructions for this?

alekslyse
19.01.2018, 19:43
Hallo Alekslyse


How does this work with the KH Director with the dosage distributed over 4 channels? is only channel 4 for KH intended for it
For Triton, dose 4x x ml to keep KH 8
Do you have instructions for this?

You can control up to 5 dosing pumps based on the KH measurement. No special programming needed. In the KH Director page in GCC you can choose to react pumps in ML or percentage. For us with Triton the "Add-on Control mode" is perfect ,where you can setup what maximum and minimum dosage intervals should be. Take a look on the KH director manual and it explains how to setup everything.

Skymario
19.01.2018, 19:48
OK
can one adjust it also with the ios app GHL or only with GCC?


Thank you

alekslyse
19.01.2018, 19:50
OK
can one adjust it also with the ios app GHL or only with GCC?


Thank you

I dont know about the ios app as im using android, but in the android app you can adjust it (and even run KH measurement manually) through the app. I assume you can do the same on the ios app.